3-8CHAPTER 3: INSTALLING THE NETWORK DRIVER

Installing the Network Driver

Follow these steps to install the network driver in a PC running Windows NT version 3.51:

1Install the 3C905B-TX NIC and connect it to the network, as described in Chapter 2.

2Restart the PC and start Windows NT.

3In the Control Panel, double-click Network.

4In the Network Settings window, click Add Adapter.

5In the Add Network Adapter window, select <Other> Requires disk from manufacturer.

6Click Continue.

7Insert EtherDisk Diskette #2 in drive A and click OK.

8In the Select OEM Option box, select 3Com EtherLink XL PCI Adapter (3C905B).

9Click OK.

The Bus Location window appears.

10Click OK.

Windows NT copies the files from EtherDisk Diskette #2.

If you are prompted for network information, contact your MIS department for the requested information.

11In the Network Settings Change window, click OK. Windows NT completes the installation.

12Click Restart to restart your PC.

If you have problems, see Chapter 4 for troubleshooting information.

Page 26
Image 26
3Com XL PCI manual Click Continue