3M 800r3 Power Requirements, Operating Rate, Operating Conditions, Tape Width, Box Board

Specifications

1.Power Requirements:

Electrical – 115 VAC, 60 Hz, 3.8 A (440 watts) Pneumatic – 6.5 bar gauge pressure [95 PSIG]

110 litre/min @ 21° C, 1.01 bar

[3.75 SCFM] at 15 boxes per minute

The machine is equipped with two 1/6 HP gearmotors and comes with a 2.4 meter [8 ft] long standard neoprene covered power cord and a grounded plug. Contact your 3M Representative for power requirements not listed above.

2.Operating Rate:

Up to 15 boxes per minute. Actual production rate is dependent on box size, box size mix, and operator dexterity.

Box drive belt speed is 24 m/m [78 FPM]

3.Operating Conditions:

Use in dry, relatively clean environments at 4° to 50° C [40° to 120° F] with clean, dry, boxes.

Note –Machine should not be washed down or subjected to conditions causing moisture condensation on components.

(Specifications continued on next page)

4.Tape:

ScotchTM brand pressure-sensitive film box sealing tapes.

5.Tape Width:

48 mm [2.0 in] minimum to

72 mm [3.0 in] maximum

6.Tape Roll Diameter:

Up to 405 mm [16.0 in] maximum on a 76.2 mm [3.0 in] diameter core. (Accommodates all system roll lengths of ScotchTM brand film tapes.)

7.Tape Application Leg Length – Standard: 70 mm ± 6 mm [2.75 in ±.25 in]

Tape Application Leg Length – Optional: (See "Special Set-Up Procedure", page 24)

50 mm ± 6 mm [2.00 in ±.25 in]

8.Box Board:

Style – regular slotted containers – RSC 125 to 275 P.S.I. bursting test, single wall or double wall B or C flute.

7