3M 800r3 manual Specifications Continued, Box Weight and Size Capacities Weight, Box Size

Specifications (Continued)

9.Box Weight and Size Capacities: Weight

Maximum – up to 38.6 kg [85 pounds] Minimum – contents must support top flaps and weight must be sufficient to hold bottom flaps fully closed.

Box Size

OUTER COLUMNS IN STANDARD POSITION

MINIMUM
Length	– 205 mm [8.00 in]
Width	– 133 mm [5.25 in]
Height	– 127 mm [5.00 in]
MAXIMUM
Length	– Not Limited
Width	– 508 mm [20.0 in]
Height	– 533 mm [21.0 in]

OUTER COLUMNS IN OPTIONAL RAISED POSITION

MINIMUM
Length	– 205 mm [8.00 in]
Width	– 130 mm [5.25 in]
Height	– 232 mm [9.12 in]
MAXIMUM
Length	– Not Limited
Width	– 508 mm [20.00 in]
Height	– 644 mm [25.38 in]

(Specifications continued on next page.)

Special modifications may be available for carton sizes not listed above. Contact your 3M Representative for information.

Note: The case sealer can accommodate most boxes within the size range listed above. However, if the box length (in direction of seal) to box height ratio is .5 or less, then several boxes should be test run to assure the proper machine performance.

DETERMINE THE BOX LIMITATIONS BY COMPLETING THIS FORMULA:

Box Length In

Direction Of Seal Must Be Greater Than .5

Box Height

Any box ratio approaching this limitation should be test run to assure performance.

8