upper corner of the curved left hand log. See Fig.
12b. Note, the top resting position of the central
log is angled to the left.
6) Place 2x smaller twigs as shown in Fig. 12b.
Note, the bottom of the twigs rest between the
stove body and burner. Take care with the right
hand twig to avoid impinging upon the pilot
assembly.
7) Take the remaining small twig and large twig
and place as shown in Fig 12c. The log layout is
now correct.
FITTING AND ARRANGING THE
LOGS (LPG ONLY)
Ensure the appliance is cold
Safety Notice - Please see SAFETY NOTICES
ref. Coal / Log set, page 3.
Warning: The logs and matrix are fragile, ensure
they are handled carefully.
Ensure location is correct. Do not force the matrix
into position. If any of the logs and/or rear matrix
is damaged, they must be replaced with genuine
Aarrow parts.
Warning: An incorrect log layout may cause soot
to build up inside the stove and therefore invali-
date the guarantee.
Key For Contents To LPG Log Set -
A= Y Shaped Rear Log
B = Loose Embers
C = Curved Log
D = Straight Log
E = 1x Medium Twig
F = 3x Small Twig
G = 2x Large Twigs
How to arrange the logs
1) Position the Yshaped log across the rear of the
burner, standing up against the rear of the firebox
and behind the burner. See Fig. 14a.
2) Scatter the loose embers over the burner, taking
care not to cover the pilot assembly. See Fig. 14a.
16 Aarrow Sherborne GSLCF
INSTALLATIONINSTRUCTIONS
Fig. 12b
Fig. 12c
Fig 13
B
A

G

E

F

D

C