Installation of Remote Control System | Aarrow Fires Gas Stove

INSTALLATION INSTRUCTIONS

NOTE: If the optional remote control system has been ordered with the stove and is not fitted please proceed.

FOR A MANUAL STOVE (WITHOUT REMOTE CONTROL) PROCEED TO PAGE 22.

INSTALLATION OF REMOTE CONTROL SYSTEM

Important

•A corgi registered gas engineer must carry out the installation of the remote control system

PARTS LIST

1Motor

2Ultrasonic Receiver

3Remote control handset

4Wiring Harness (Multiblock end to reciever, spade connections to motor/micro switch)

5Micro-switch

6AA/LR6 1.5v Batteries (4x) & 9V-6F22 9v Battery (1) Supplied (Not Shown)

4

1	5	2	3

	Fig. 15
Technical data
Ambient temperature range	Remote and receiver	max. 140deg F / 60deg C
	Connecting cable	max. 356deg F / 180deg C
Batteries	Quality Alkaline	Handset:	1x9V Block
		Receiver:	4x1.5V AA

18	Aarrow Sherborne GSL CF

Image 18

Aarrow Fires Gas Stove Installation of Remote Control System, For a Manual Stove Without Remote Control Proceed to

Contents

Sherborne GSL Contents GuaranteeSpare Parts Installation Instructions Safety NoticesGeneral Information Unpacking note Stove locationPacked details Fit for purpose Main Box Installation Instructions Important Notices Statutory RequirementsCertification Max. Heat Setting Installation Instructions Technical DataInstalling the Stove Min. Heat Setting Installation Instructions Preparation of the Stove Stove must not be installed against a combustible wallStove Location Installation Instructions Shelf Clearances Non-Combustible shelf clearances Installation Instructions Flue System Closure Plates Rear Flue OptionsTOP Flue Options =See Graph Installation Instructions Connecting the GAS Supply Pressure Test Sequence Fitting and Arranging the Coals Both NG & LPG versions How to arrange the logs Fitting and Arranging the Logs NG only Fitting and Arranging the Logs LPG only Installation Instructions Installation of Remote Control System For a Manual Stove Without Remote Control Proceed to Assemble Motor Assemble Receiver Slot Handset Fire Testing Commissioning the Stove Advise the end user Checklist Servicing Replacement of the Glass Burner and Valve Assembly Removal Servicing Servicing Annual Service Cleaning Outer SurfacesSee Safety Notices ref coal set Fault Diagnosis OSD Pilot Annual Service Record Date of Visit Company Work Carried Out Signature Additional Notes User Instructions User Instructions Lighting & Controlling the Fire User Instructions To turn the stove and the pilot offDo not try to force the control, wait the 60 seconds Temperature Display Remote Control Programming the Timer Thermostat and Timer Remote ControlProgramming the Desired Set Temperature Set the display from *C/24 h to *F/12 h and vice versa Automatic Mode Auto in display for Temperature Control User Instructions User Instructions Important Notices User Instructions Shelf Clearances Spare Parts Part Description Visual Aid Part Number Spare Parts AFGS010 Traceshb Options & AccessoriesRemoteshb Aocshb Guarantee Please complete the following for you own records Additional Notes ’ve checked it and it’s O.K