Aarrow Fires Gas Stove user manual Installation Instructions Technical Data, Installing the Stove

INSTALLATION INSTRUCTIONS

TECHNICAL DATA

Gas Type	Natural	LPG
	Gas

	Gas
			I2H			I3P
	Category
	Supply
			20mbar			37mbar
	Pressure
	Injector		Bray 82/400			Bray 82/160
	Max. Heat
	Setting
	Heat Input		6.1 kW			5.7kW
	(gross)
	Gas Rate		0.55m3/hour			0.21m3/hour
	Min. Heat
	Setting
	Heat Input		2.5 kW			2.5kW
	(gross)
	Gas Rate		0.23m3/hour			0.09m3/hour
Efficiency			CLASS 2			CLASS 2
Class
NOx Class			Unclassified			Unclassified
		AT,DK,ES,FI,
					ES,FR,GB,
Country Of
		GB,GR,IE,IT,			GR,IE,IT,PT
Use
		NO,PT,SE
	Gas Council	32-248-06		32-248-07
	Id Number

Table 1

Fig. 3

INSTALLING THE STOVE

A CORGI qualified gas engineer MUST install the stove in accordance with the following regulations and stan- dards:-

The Gas Safety (Installation and Use) Regulations current edition.

The Building Regulations for England and Wales 2000 ref; Approved Document J 2002 edition (issued by the DTLR).

The Building Standards (Scotland) (Consolidation) Regulations.

BS5440 parts 1 and 2 BS5871 And these Installation Instructions.

Warning: Failure to comply with the regulations, requirements, or these instructions will invalidate the guarantee and could have hazardous consequences.

IMPORTANT

Please note that in tight recesses the gas supply point may be inaccessible. Therefore it may be necessary to route the pipe for the gas supply before installing the stove into its recess.

Aarrow Sherborne GSL CF 7