USER INSTRUCTIONS
Step 3. To turn the stove and the pilot off
completely, turn control knob “A” to the small flame setting, (pilot frame) depress and turn to off position, then release (See Fig. 20e)
BA
Fig. 20e
Important, when control knob “A” is turned to the off position a
Do not try to force the control, wait the 60 seconds.
NOTE! If the pilot flame is extinguished either intentionally or unintentionally, no attempt to re- light the gas should be until at least 3 minutes has elapsed.
NOTE! During the initial firing, the stove will give off
NOTE! The fire doors can be opened during oper- ation, for a greater viewing area to the flame pic- ture, this does not effect the operational perform- ance of the stove.
NOTE! During operation, the metal surface of the stove will be HOT, a operating tool is supplied with the stove and can be used to open the doors if required. See fig. 20f.
CLEANING OUTER SURFACES
It is best cleaned using a soft brush.
Do not allow moisture to remain on the stove while cold or surface rust may occur.
Fig. 20f
Aarrow Sherborne GSL CF | 33 |