Replacing the DIMM Modules

1.Insert the DIMM Module in place.

2.Press down to lock the DIMM module in place.

Replacing the Hard Disk Drive Module

1. Place the HDD in the HDD carrier.

2. Replace the two screws to secure the carrier.

3.Insert the HDD, interface side first, and lower it into place.

4.Slide the HDD in the direction of the arrow to connect the interface.

186

Chapter 3

Page 196
Image 196
Acer 8940 manual Replacing the Dimm Modules, Replacing the Hard Disk Drive Module, Place the HDD in the HDD carrier