8-16
ANA-5910/5930/5940 User’s Guide
ANA-5910/5930/5940 Use r’s Gui de
Stock Number: 510694-00, Rev. C Page: 8-16
Print Spec Number: 493081-00
Current Date: 5/28/97 ECN Date: 05/29/97
Removing ATM Software for NetWare 4.1
To remove the Adaptec ATM software for Novell NetWare 4.1
1Boot the server.
2At the server system console prompt, type the following
command and press Enter:
load install
3From the Installation Options menu, select Driver options and
press Enter.
4From the Driver Options menu, select Configure network
drivers and press Enter.
5From the Additional Driver Actions list, sel e ct Deselect a
selected driver and press Enter.
If only one ATM driver is installed, the Unload driver anyway?
menu appears. Go to step8.
If two or more drivers are installed , the Selected Network
Drivers menu appears. Go to the next step.
6From the Selected N etwork Drivers m enu, select the dri ver
you want to remove and press Enter.
7From the Unload driver anyway? menu, select Ye s.
8When the message screen appears, press Enter.
9From the Additional Driver Actions menu , select Return to the
previous menu and press Enter.
10 From the Driver options menu, select Return to the previous
menu and press Enter.
11 From the Installation Options menu, select Exit and press
Enter.
12 From the Exit INSTALL menu, select Yes and press Enter.