5-5
Installing ATM Version 2.0x Drivers for Windows NT
ANA-5910/5930/5940 Use r’s Gui de
Stock Number: 51069 4-00, Rev. C Page: 5-5
Print Spec Number: 493081-00
Current Date: 5/28/97 ECN Date: 05/29/97
12 If TCP/IP is installed on your workstation, the TCP/IP
Configuration dialog box appears, requiring that you set other
protocol addresses and information. Re f e r to your Windows
NT user documentation for information about setting up your
TCP/IP configuration, and when you have entered the
necessary TCP/IP data, select OK. If you do not have TCP/IP
installed, these configuration screens will not appear.
13 Select Yes to save and initialize changes.
Installing LANE Device Drivers
Note: Ensure that CIP drivers have been installed
before LANE client drivers. If no CIP drivers have
been installed, follow the procedures in the previous
section to install them.
LANE client drivers a re in s ta l le d from the Network Setti n g s di al og
box in the Control Panel. Up to 4 clients (numbered 0 to 3) can be
installed at one time.You mu st install the first client (0) before you
can install any additional client.
Installing a LANE Client Driver
1From the Control Panel window, double- click on the Network
icon.
2From the Network Settings dialog box, selec t the Adapters tab.
3Click on the Add button to add a device driver.
4Insert the LAN Emulation Client diskette in the diskette drive.
5Select the Have Disk button.
6Select the drive letter of the diskette drive th at contains the
LAN Emulation Client diskette, and then select OK.
7Select Adaptec Inc. ATM LANE Adapter, and then select OK.