5-26
ANA-5910/5930/5940 User’s Guide
ANA-5910/5930/5940 Use r’s Gui de
Stock Number: 510694-00, Rev. C Page: 5-26
Print Spec Number: 493081-00
Current Date: 5/28/97 ECN Date: 05/29/97
3Start the drivers you need to use by entering the command and
in the following order:
Various command-line options are available for each uti lity. You can
get help for any of the commands listed in this appendix by typing
-h after the utility, for example:
aatmcnfg -h

aarpcnfg.exe

The
aarpcnfg.exe
utility is used for configuring the
aarp.sys
driver.
The following is the syntax for using this utility :
aarpcnfg [-f ConfigFile] -[s | d]
Options:
Use the -f ConfigFile option to start the
aarp.sys
driver with a
database file other than the default
aarp.db
.
aatmcnfg starts the
atmo.sys
driver; use the -q option if
you

do not

want to use SVCs and if you do not
want to register with an ATM switch (i.e., in
back-to-back connections); use the -a option if
your switch does not support ILMI address
registration
aarpcnfg star ts the
aarp.sys
driver (only needed on the
ATMA RP se rv er )
acipcnfg starts the Classical IP part of
atmo.sys
alanecnfg starts the
alane.sys
driver.
-s shutdown
-d debug