4-14
ANA-5910/5930/5940 User’s Guide
ANA-5910/5930/5940 Use r’s Gui de
Stock Number: 510694-00, Rev. C Page: 4-14
Print Spec Number: 493081-00
Current Date: 5/28/97 ECN Date: 05/29/97
Using Device Drivers and Utilities

Stopping ATM Drivers

To stop ATM driver s:
1If your path is not set up, chan g e to the following directory :
\winnt\system 32\adptaatm\bi n
2Stop the driver using the appropriate command below and in
the following order:

Starting ATM Drivers

To start the ATM drive rs
1In the Program Manager’s Main group window, select the
MS-DOS Command Prompt icon.
The Command Prompt window appears.
1If your path is not set up, chan g e to the following directory :
\winnt\system 32\adptaatm\bi n
2Start the drivers you need by entering the commands in the
following order:
Various command-line options are available for each uti lity. You can
get help for any of the commands listed in this appendix by typing
-h after the utility, for example:
aatmcnfg -h
alancnfg -s stops the
alane.sys
driver
aatmcnfg -s stops the
atmo.sys
driver
aatmcnfg starts the
atmo.sys
driver; use the -q option if
you
do not
want to use SVCs and if you do not
want to register with an ATM switch (for
example, in back-to-back connections); use the
(-a) option if your switch does not support ILMI
address registration
alancnfg starts the
alane.sys
driver