1-1
ANA-5910/5930/5940 Use r’s Gui de
Stock Number: 51069 4-00, Rev. C Page: 1-1
Print Spec Number: 493081-00
Current Date: 5/28/97 ECN Date: 05/29/97
1
▼▼▼▼
Getting Started
This document contains information on installin g and configuring
the Adaptec® ANA™-5910/5930/5940 adapters. These adapters
provide the interface between your computer’s PCI bus and a
network that uses Asynchronous Transfer Mode (ATM). Procedures
in this document describe installing the a dapter, installing and
configuring the adapter drivers, and performing administrative and
management functions for your ATM network.
Note: The procedures in this document assume that you are
connecting the adapter to an external ATM local area
network (LAN) switch.

System Requirements

Certain hardware and s oftware components are required to use the
ANA-5910/5930/5940 adapters.

Hardware Requirements

The minimum hardware system requirements are as follows:
■PCI rev. 2.0-compliant computer with +5V PCI slots for the
ANA-5910 and +5V/+12V PCI slots for the ANA-5930/5940
■An available PCI bus master slot