Adaptec ANA-5940 3, 4, 5, 6, 7 8, 9

8-8
ANA-5910/5930/5940 User’s Guide
ANA-5910/5930/5940 Use r’s Gui de
Stock Number: 51069 4-00, Rev. C Page: 8-8
Print Spec Number: 493081-00
Current Date: 5/28/97 ECN Date: 05/29/97
3Insert the ALANE Driver for Novell NetWare v1.0 diskette in a
diskette drive.
4If the diskette is in drive A, press Enter. If the diskette is in a
different location, press F3 to specify another path.
The system scans for available drivers.
5From the Select a driver to install menu, select ALANE.LAN
and press Enter.
6From the Board AL ANE_1 (Driver ALANE) Actions menu,
select Select/Modify driver parameters and protocols and press
Enter.
7Press F3 to manually set IPX frame types.
8From the Frame Type List, select the appropriate frame type(s)
and press F10.
9In the ALANE_1 Parameters section, configure the LANE
Client by changing the following parameters, as needed.
Parameter Defaul t Value Possible Values Description
MAXIMUM
TRANSFER
RATE
1516 1516,
4544,
9234,
18190
Specifies the maximum
transfer size the ELANE
supports.
ELANE ID 0 0, 1, 2, 3 Identifies the slot
occupied by the
ELANE. The
ANA-5910/5930/5940
supports up to 4
emulated LANs,
numbered 0–3.
DCS_FEATUR
Eon on, off Enables dynamic
channel sharing (DCS),
which allows ATM to
transmit channels to
load-balance net w o r k
traffic.