8-7
Installing ATM Software for Novell NetWare
ANA-5910/5930/5940 Use r’s Gui de
Stock Number: 51069 4-00, Rev. C Page: 8-7
Print Spec Number: 493081-00
Current Date: 5/28/97 ECN Date: 05/29/97
3Add the following command as the last line of the file:
sys:\system\atms.ncf
4Save and exit the file.

Automating ATM Software Installation

To automate Adaptec ATM software installation, you must modify
your autoexec.ncf file as follows:
1Type the following command at the system prompt, and press
Enter:
load edit
2In the File Edit screen, type the following command at the
system prompt and press Enter:
sys:\system\autoexec.ncf
The File SYS:\SYSTEM\AUTOEXEC.NCF screen appears.
3Add the following command line:
search add a:
4Save and exit the file.
Installing, Configuring, and Loading Adaptec ATM Software for NetWare 4.1
This section contains instructions for installing and c onfiguring
Adaptec ATM software for Novell NetWare 4.1 and for loading the
software automatically on system boot.

Installing and Configuring the ATM Software While

Installing NetWare 4.1

To install the Adaptec ATM software while installing Novell
NetWare 4.1
1Begin the procedure for installing Novell NetWare 4.1, as
explained in your NetWare documentation.
2When the Choose the Server Drivers - Network Driver screen
appears, press Insert to install an unlisted driver.