ADC NXD Power, Optical, Table 2. RAN Specifications

ADCP-75-210 • Issue 1 • March 2007

Table 2. RAN Specifications

ITEM	SPECIFICATION	COMMENT
Power
AC power ingress	240 VAC, 20 Amps, single phase
Battery backup options		-48 volts
extended	120 minutes	@25 degrees C (degrees F)
glitch	5 minutes	for four bands
RAN box power use	2700 Watts Max.
	16 Amps Max.
cPCI rack power	-48 VDC
Optical
Fiber cable ingress	Nylon connector accommodates	For larger cable sizes, refer to the
	cable diameters in range 0.38-	note in Section 1.6.2 on Page 9.
	0.50 inches (0.97-1.27 cm).
Fiber type	Corning SMF-28 or equivalent
Optical connectors	LC	Standard on SFP transceivers
Insertion loss	0.2 dB Typical, 0.4 dB Max.
Number of fibers required	1-4 fiber runs per RAN
Fiber configuration	Star (point to point) or ring	Ran ring limited to 3 SIFs
Fiber data link protocol	OC-48
Wavelengths per fiber	1 (1310 nm)	Without WDM/CWDM option
with WDM option	2 (1310/1550)
with CWDM option	8 (1470-1610)	20 nm increments (ITU-GRID)
Optical transceiver type	SFP	Dual LC connector
Optical Tx power	-3 dBm Max, -10 dBm Min.	Finistar FTRJ-1320-1
		(or equivalent)
Optical Rx sensitivity	-22 dBm Typical, -18 dBm Max.
Optical link margin	2 dB	Estimated
Optical link loss	6 dB	Estimated
Optical Rx saturation level	-3 dBm	Min. Max. operational power
Optical Rx damage level	-3 dBm	Min. Max survivable power
Optical safety class	1	ANSI Z 136.2
RF
Tuning frequency	Receive Path	Transmit Path
PCS band	1850-1910 MHz	1930-1990 MHz
Cellular band	824-849 MHz	869-894 MHz
SMR 800 band	806-824 MHz	851-869 MHz
SMR 900 band	896-901 MHz	935-940 MHz
Instantaneous bandwidth	15 MHz
Receiver noise figure		Measured at Hub output connec-
PCS band	6 dB	tor (BIM, RxP) without BTS at 10
Cellular band	5 dB	dB gain and a single RAN

Page 7

© 2007, ADC Telecommunications, Inc.