ADC NXD 2.7.4Installing Pre-ConnectorizedIndoor/Outdoor Fiber Optic Cable

ADCP-75-210 • Issue 1 • March 2007

GPS

PCS-P

PCS-D

CELL/SMR-P

CELL/SMR-D

		21278-A
		Figure 33. Installing the RF Cables
	Table 21. RAN Antenna Ports and Antenna Base Ports
LABEL ON RAN	LABEL ON ANTENNA	BAND
GPS	GPS	Global Positioning System (GPS)
PCS-P	PCS-T	PCS primary receive path and transmits from PCS A, B or F
PCS-D	PCS-B	PCS diversity receive path and transmits from PCS D, E or C
CELL/SMR-D	CELL/SMR-D	Cell/SMR primary receive path and transmits from Cell A”/A
CELL/SMR-P	CELL/SMR-P	Cell/SMR diversity receive path and transmits from SMR A or
		Cell B/B’

Note: When building out RANs, connect the quadplexers that will contain the first PCS bands to the top of the PCS antenna element. On the Phasar antenna, this is marked on the base PCS-T.

2.7.4Installing Pre-Connectorized Indoor/Outdoor Fiber Optic Cable

Fiber optic cable installation consists of routing a pre-connectorized outdoor-rated fiber optic cable from an external splice enclosure to the NXD RAN cabinet, routing the cable into the cabinet, and then breaking out the individual fibers for connection. The NXD RAN has a fiber interface on the front of the Synchronous Interface (SIF) Module in the RAN chassis. The fiber enters the cabinet on the rear side.

Page 47