Repl 5667, Del | Adcom A723, A720 instruction

36

CHAPTER 4

Performing Advanced Functions

PARAMETERS	The old ID and the new ID.
RETURNS	Nothing.
REMARKS	SET only.
REMOTE	No.
EXAMPLE	REPL 5667 5666
	193	REPL 0
	#
	REPL
	193	REPL 5
	#
	Note: The second example shows a REPL command without
		parameter: error 5 is returned (missing or false parameter).
COMMAND	DEL
APPLIES TO	A720B
DESCRIPTION	Deletes a device from the local devices list.
PARAMETERS	The ID of the device to be deleted.
RETURNS	Nothing.
REMARKS	SET only.
REMOTE	No.
EXAMPLE	DEL 5666
	193	DEL 0
	#
	DEL
	193	DEL 5
	#

Note: The second example shows a DEL command without param- eter: error 5 is returned (missing or false parameter).

COMMANDDATA

APPLIES TO

A720, A720B, A723

Image 36

Adcom A723, A720 manual Repl 5667, Del

Contents

ADC N ADC N Contents Contents Introduction What are addIT devices? Installation issues Conventions Italics Chapter Using the Base Station Opening the packages Installing the base station Installing the receiver Installing the power supply AddIT Power Supply Replacing the fuse Conﬁguring the software Using the RTU Installing the RTU Shows an addIT RTU Shows what a typical RTU ﬁeld installation looks like More about the LED tool RTU battery Maintaining and servicing the RTUConﬁguring an addIT RTU in the addVANTAGE software Changing the battery Chapter Chapter Performing Advanced Functions Understanding connectors Receiver connectorDevice series RTU connectors Pins on an I/O Connector Top View AddIT RTU Power Connector Top View Conﬁguring the devices General format of a command Serial communication protocolGeneral format of an answer Using terminal commands Series 1 devicesSET Ownid nnnn SET Ownid SET PMP bl bhSET PMP 63 SET Slot 3600 SET Freq freq step SET Freq 467112500SET Rssi value Querying the actual conﬁguration parameters SET Rssi Series 2 and 3 devices Cmds Freq Freq 433925000Freq Freq 433925000 25000 Slot PMP PMP 65 72 193 cm193 CM 1 SST DEV Repl Repl 5667 DELDEL Data 5666 12/12/1998 Data b1 b2 b3 ... bnDd mm yyyy hh mm ss si ft d1 d2 ... dn dd mm yyyy Dn cs Frame 38 description Data 6367 30/4/1999 Frame 39 description Data ImmeRoute Fdev Info Temp = internalTem p Info 255 0 18/4/1999 21511 1.3 0 0 0 91 146 900Anlg Code Description Parameters Returns Sampling methods are deﬁned by three bits, as follows Return result depends on the control byte see table. However A720B and A723, but see also the comments in Remote on Performing Advanced Functions Command Code Deﬁnitions Port 6789 Port 7/5/1999 183422 193 RX193 TX 6789 B #234 BA#7851 BA 15190 B Blst 30/8/2001 160341 VERVER 1.3 VER 2.0 Notiﬁcations Returned errors list Command line interpreterDevice descriptors and storage handler Real time clock Notiﬁcations Chapter Appendix. Speciﬁcations Parameter Min Typ Max Unit Transmitter all measurements made on a 50 Ω resistive load Chapter Chapter Index INFO, 41 OWNID, 26 PMP PMP What a base station contains Xmit Credits and Colophon CreditsColophon