ADIC Version 5.0 manual Example below, a Scsi library is being installed

Installing VolServ

Step 10. Enter the VolServ license string. If you do not enter it now or want to change the string later use the $VS_DIR/util/change_license utility. For instructions, see “Updating the License String” on page 3-17.

Please enter the license strings that were delivered with the VolServ software. If for some reason you did not receive any license strings, please call the ADIC ATAC at:

1-800-827-3822 (within the USA and Canada)

Have this number ready: #####

You can skip this section now and enter the license later.

Do you wish to enter the license strings now (<y> or n) ? y

------------------------------------------------------------------

What is the VOLSERV license string 00000000? #######

Is ####### your intended response (<y> or n) ? y Updating VOLSERV license string … done.

------------------------------------------------------------------

Step 11. Enter the appropriate license strings for all your storage devices. The $VS_DIR/config/envvar.config file will be updated to incorporate these entries.

Tip

In the example below, a SCSI library is being installed.

What is the SCSI license string 0000000000000 ? #############

Is ############# your intended response (<y> or n) ? y Updating SCSI license string … done.

Procedures Installation

601351 Rev A Installation Procedures 2-13