ADTRAN 61200051L1, 1200051L6, 1200051L2, 1200051L5 user manual Call control error

Appendix C: Status Buffer Messages

Bad DTE baud

The DTE bit rate does not match a valid bit rate for the protocol se- lected.

Bad DTE bps

Bonding negotiation determined the chosen DTE bit rate is in- valid.

BAD_INFO_ELEM

Call control error.

Bad phone number

ISU 2x64 attempted to call an invalid phone number.

Bad TLK Version

Invalid TLINK parameters found during end-to-end negotiations.

Baud Rate

ISU 2x64 does not support the negotiated TLINK baud rate.

BEAR_CAP_NOT_AVAIL

The bearer channel requested by the user is not available.

Bearer mode

Incoming call is not of a type the ISU 2x64 can accept.

Bearer info mode

Incoming call information transfer capability is not known.

BONDING (+/- XXX)

The amount of bytes of corrected delay between the B2 and B1 bearer channels (XXX can range from -8000 to +8128 bytes ).

BPS mismatch

Bonding negotiation found a bit rate mismatch.

Break to AT cmd

User issued a break-in request (+++).

Break ignored

User issued an extra break-in request.

100 ISU 2x64 Dual Port ISDN Service Unit User Manual 61200051L1-1D