ADTRAN 1200051L1 Setting Connect Timout, Setting Call Screening, Connect Timout Menu Tree

Chapter 6. Configuration

Setting Connect Timout

Connect Timout sets the length of time that the ISU 2x64 waits for a far-end unit to answer an outgoing call. These choices are illustrated in Figure 6-10.

				1=Switch protocl
				2=Call type
			1=Dial Line
				3=Terminal ID
		1=Netw. options	2=Leased Line
				4=Busy Out	1=15 sec
3=CONFIG	2=DTE options
				5=Dial options
		3=Protocol			2=30 sec (def)
				6=Auto answer	3=1 Minute
		4=Quick setup
				7=Answer tone	4=2 Minute
		5=Security
		6=Remote Config		8=Connect Timout	5=4 Minute
				9=Call Screening
				10=SBus Terminati

Figure 6-10

Connect Timout Menu Tree

Setting Call Screening

Call Screening allows the ISU 2x64 to either answer all incoming calls (default) or only calls originating from phone numbers stored in the DIAL menu as stored numbers SN0 through SN9. See Front Panel Dialing Options on page 63 to review how to store numbers. Figure 6-11 illustrates the menu tree for setting call screening.

3=CONFIG

	1=Dial Line
1=Netw. options	2=Leased Line

2=DTE options

3=Protocol

4=Quick setup

5=Security

6=Remote Config

1=Switch protocl

2=Call type

3=Terminal ID

4=Busy Out

5=Dial options

6=Auto answer

7=Answer tone

8=Connect Timout

9=Call Screening

10=SBus Terminati

1=Answer any

2=Ansr if SN0. . .9

Figure 6-11

Call Screening Menu Tree

61200051L1-1D ISU 2x64 Dual Port ISDN Service Unit User Manual 45