Chapter 6. Configuration
DTE Options for Asynchronous and Synchronous Operation
The DTE options are configured separately for both DTE#1 and DTE#2. When using the front panel, select the appropriate DTE with either arrow key and press Enter. (See Figure
Ensure the DTE equipment is set for asynchronous operation before at- tempting to make an asynchronous call. Failure to do so causes the call attempt to fail.
3=CONFIG
1=Netw. options
2=DTE options
3=Protocol
4=Quick setup
5=Security
6=Remote Config
1=Asynchronous
2=Synchronous
1=Bit Rate
2=Connector Type
3=RTS Options
4=CTS Options
5=CD Options
6=DTR Options
7=DSR Options
8=Flow Control
9=Data Format
Figure
Asynchronous DTE Options Menu Tree
1=Bit Rate
2=Connector Type
3=RTS Options
3=CONFIG
1=Netw. options
2=DTE options
3=Protocol
4=Quick setup
5=Security
6=Remote Config
1=Asynchronous
2=Synchronous
4=CTS Options
5=CD Options
6=DTR Options
7=DSR Options
8=Transmit Clock
Figure
Synchronous DTE Options Menu Tree
50 | ISU 2x64 Dual Port ISDN Service Unit User Manual |
