2.15 ATX power on function select (J11)
T A B L E 2 - 5 : A T W P O W E R O N F U N C T I O N S E L E C T ( J 11 )
| Default on | Default off * |
J11 | 3 | 2 | 1 | 3 | 2 | 1 |
| | | | | |
* default setting | | | | | |
Note1: | J11 select 1-2, that while AC power is turned on, the |
| system cannot boot up without ATX power switch |
| button J4. | | | | | |
Note2: | J11 select 2-3, that while AC power is turned on, the |
| cannot boot up without ATX power switch button J4. |
2.16 IR connector (CN8)
The PCM-9570/S provides an IrDA port for transfer rates of 115 Kbps. This connector supports the optional wireless infrared transmitting and receiving module. This module mounts on the system case. You must configure the setting through BIOS setup.
2.17 COM-port connector (CN20)
The PCM-9570/S provides four serial ports (COM1, 3, 4: RS-232;
COM2: RS-232/422/485) in one COM port connector. The COM port connector is a 40-pin, dual-in-line, male header and provides connections for serial devices (a mouse, etc.) or a communication network. You can find the pin assignments for the COM port connector in Appendix C.
2.17.1 COM2 RS-232/422/485 setting (J10)
COM2 can be configured to operate in RS-232, RS-422, or RS-485 mode. This is done via J10.
22 PCM-9570/S User's Manual
