2.3.2DIN-rail Mounting

You can also mount EKI-7657C on a standard DIN-rail by steps below.

The DIN-rail kit is screwed on the industrial switch when out of factory. If the DIN-rail kit is not screwed on the industrial switch, please screw the DIN-rail kit on the switch first.

First, hang the EKI-7657C to the DIN-rail with angle of inclination. See Figure 2.6.

Figure 2.6: Installation to DIN-rail Step 1

EKI-7657C _Manual_ed1

16

Page 26
Image 26
Advantech EKI-7657C user manual DIN-rail Mounting, Installation to DIN-rail Step