75 Chapter3
A trap manager is a management station that receives the trap messages generated by the switch. If no
trap manager is defined, no traps will be issued. Create a trap manager by entering the IP address of the
station and a community string. To define a management station as a trap manager, assign an IP
address, enter the SNMP community strings, and select the SNMP trap version.
• IP Address: Enter the IP address of the trap manager.
• Community: Enter the community string.
• Trap Version: Select the SNMP trap version type—v1 or v2c.
• Click
A
dd .
• To remove the community string, select the community string listed in the current managers field and
click Remove .
Figure 3.43: Trap Configuration interface
SNMPV3 Configuration
Configure the SNMP V3 function.
Context Table
Configure SNMP v3 context table. Assign the context name of context table. Click Add to add context
name. Click Remove to remove unwanted context name.
User Profile
Configure SNMP v3 user table.
• User ID: Set up the user name.
• Authentication Password: Set up the authentication password.
• Privacy Password: Set up the private password.
• Click Add to add context name.
• Click Remove to remove unwanted context name.