Manual
Page 25 / 33- Revision 01
ARE I2 / RS 232 – Installation Guide
•Wait for the answer
•Analyse the received answer: 3 characters plus <CR>.
<ACK> <CR> | Writing process was successful |
<NAK> <CR> | Writing process was not successful. |
<NOT> <CR> | The response of the transponder was not readable. |
The result of the writing process may also seen at the LED’s.
•LED L2 lit, if there was a successful write
•LED L3 lit, if there was no successful write.
Example
WD <SP> 20 <SP> < 0 1 2 7 A C D F > <CR> | Write to block 20 |
Allowed Values (block numbers of the transponder IC): | |
ALGO 9 (1kBit Memory) | 3 .... 31 |
ALGO 6 (2kBit Memory) | 16 ... 63 |
AEG
Identifikationssysteme GmbH
Söflinger Straße 100
Tel.
