Manual
Page 3 / 33- Revision 01
| ARE I2 / RS 232 – Installation Guide |
| ||
6.7 | BD- Baudrate |
| 19 | |
6.8 | TOR – Maximum Reading Time | 20 | ||
6.9 | VS- Show Parameter |
| 20 | |
6.10 | VSAVE – Save Parameter | 20 | ||
7 OPERATING MODES OF THE READER | 21 | |||
7.1 | Mode 2 – Triggered by an Software Command | 21 | ||
7.1.1 | Settings of the Reader / Most Used Parameters | 22 | ||
7.1.2 | Basic Data Exchange Process | 23 | ||
7.1.3 | 23 | |||
7.1.4 | R / W | 23 | ||
| 7.1.4.1 | Standard Read Process / Serial Number of the Transponder GT | 23 | |
| 7.1.4.2 | Selective Read | RD | 24 |
| 7.1.4.3 | Writing Process | WD | 24 |
7.2 | Operating Mode 0 - Continuous Reading | 26 | ||
7.2.1 | Settings of the Reader / Most Used Parameters | 26 | ||
8 | INSTRUCTIONS |
| 28 | |
8.1 | General Instructions |
| 28 | |
8.2 | Special Instructions for Using a Read / Write System | 29 | ||
9 | HOTLINE |
| 30 | |
10 | REFERENCE DOCUMENTATION | 30 | ||
11 | REVISIONS |
| 30 | |
12 | APPENDIX |
| 31 | |
12.1 | Best Orientation for an | 31 | ||
12.2 | Best Orientation for an | 32 | ||
12.3 | Assembling of the SAB Cab | 33 | ||
AEG
Identifikationssysteme GmbH
Söflinger Straße 100
Tel.
