Aegis Micro NRC 2.0.1 Change Antenna Model Dialog

Users’ Guide: Networked Receiver Controller - NRC-2.0.1 PAGE 32

Change Antenna Model Dialog

The name of the antenna connected to a receiver may be changed from the channel node in the

tree if the client is currently connected to that channel. Right-click on the channel node, select

“Change antenna”, and the “Change antenna” dialog appears.

The current antenna name is displayed. Type in the new antenna name in the text box provided.

Press Enter or click the Enter button and the dialog will be dismissed.

The change in antenna name is persistent and will be remembered even after the NRC server is

powered off.

Contents

Main NRC-2.0.1 Proprietary Statement Disclaimer Warning Table of Contents Page General Information Channel Architecture Audio Data Capture Universal Receiver Translation/Abstraction Capabilities Summary Specifications o Page Installation Contents Hardware Installation Step 1: Receiver Audio Signal Termination Type Step 2: Rack Mount the NRC unit Step 3: Connect Power Step 4: Connect Receivers NRC Configuration Prerequisites: Step 1: Connect to the NRC Step 2: Change Administrator Password Step 3: Configure Network Settings Step 4: Set the Time and Date Step 5: Configure the Network Time Daemon (Optional) Step 6: Set the Host Name Step 7: Restart the NRC Page Step 8: Configure the NRC for Receivers Operation Using the NRC Starting the NRC Power-On Self Test (POST) Interpreting the LCD Display Page Requirements Running the NRC Java Client Connect to NRC Server Dialog The Main Application Window Tree Channel Nodes Content Panel NRC Servers Node NRC Server Node Page Channel Node Page Page Toolbar Status Bar Change Receiver Model Dialog Change Antenna Model Dialog NRC Properties Dialog Capture Channel Data Dialog Destination Options Signal Display Dialog Page Appendix A- Receiver Configuration BAE Systems WJ-8723 TEN-TEC RX-331 Appendix B - Software Upgrades NRC File System UPDATE Command RESTORE Command CLEAN Command Upgrade Procedure