Toolbar
The icon buttons on the top toolbar provide quick access to common functions. The below table summaries these:
“Connect to NRC server” button: when clicking this button, the “ Connect to NRC server” dialog is raised, allowing the user to connect to an NRC server.
“Disconnect from NRC server” button: this button is enabled when an NRC server is selected in the tree. When clicking this button, the user can choose to disconnect from the selected NRC server.
“Reboot NRC Server” button: This button is enabled when an NRC server is selected in the tree. When clicking this button, a dialog will appear asking if you really want to reboot the NRC server. Selecting yes in this dialog will cause the NRC server to perform a warm re- start. All connections to the NRC server will be terminated and new connections will need to be established with the NRC once it is fully reboot, about 60 seconds later.
“Receiver version” button: This button is enabled when the NRC server is selected in the tree. When clicking this button, a summary of the NRC software modules is displayed
Users’ Guide: Networked Receiver Controller - | PAGE 29 |
11th October 2005 | Copyright © 2005 Aegis, Inc |
