Aegis Micro NRC 2.0.1 manual Users’ Guide Networked Receiver Controller NRC-2.0.1

The LCD display symbols are listed – from highest to lowest priority, along with their meaning in the following table.

The NRC is not configured for this channel; Configure the correct receiver for this channel.

The receiver attached to this channel is currently offline.

-Caused when the NRC is unable to communicate with the receiver via the RS-232 connection.

-Check the receiver and its NRC connections, whether the receiver is powered on, and whether the receiver is operational or needs to be reset or needs the power cycled.

The receiver attached to this channel failed an integrity test.

-Caused when a receiver is able to communicate with the NRC, but fails to respond as expected when

tuned to provide a self-test audio tone to the NRC unit.

-Check the receiver’s RS-232 and audio connections to the NRC match and then reboot/re-power the receiver and/or the NRC.

A client is currently connected to this channel and is receiving data from this channel.

A client is currently connected to this channel.

This channel is fully functional and available for use.

When the NRC is configured and operating correctly symbols , and will be most often displayed.

Users’ Guide: Networked Receiver Controller - NRC-2.0.1 PAGE 21

11th October 2005 Copyright © 2005 Aegis, Inc wwww.aegis-inc.net [ph. 240-568-9006]