4 Operating the Power Supply Remotely
Factory-shipped LAN Settings
The
The
Factory-shipped non-volatile LAN settings
Get IP Address | Automatic |
IP Address | 169.254.57.0 |
Subnet Mask | 255.255.0.0 |
Default Gateway | 0.0.0.0 |
Obtain DNS server from DHCP | Enabled |
DNS server | Blank |
Host name |
Dynamic DNS naming service | Enabled |
NetBIOS naming service | Enabled |
Domain name | Blank |
TCP keepalive | Enabled |
TCP keepalive seconds | 1800 |
Ethernet | Enabled |
Ping server | Enabled |
Web password | Blank |
Using the Setup Utility
A Setup utility that lets you configure the LAN settings of your instrument is provided on the Product Reference
1Connect your power supply to your computer using either the USB interface or the GPIB interface as previously described.
2Install the Setup utility on your computer. Run the Setup utility by clicking StartProgramsAgilentN5700 Setup Utility.
3Configure the following LAN address parameters. These are located under the Settings tab. For a description of these parameters, refer to the previous section.
56 | Series N5700 User’s Guide |