Auto recording
When the call button is pressed at a video door station, a snapshot or video of the image at the door is recorded automatically.
When [Audio Recording] is set to ON:
•When called from a sub station, recording of the sounds at the station automatically starts when a communication is started.
•When called from a master station, recording of the sounds at the station starts immediately.
If you want to stop video recording, click 
.
* 
turns into 
.
NOTE:
During recording, the square part in 
is illuminated.
Manual recording
You can record a snapshot or video of the image at the door (and sounds depending on the setting) manually in the following states.
•When called from a video door station
•When monitoring a video door station
•When communicating with a video door station
■How to perform manual recording
Snapshot recording
Click 
when called from, monitoring or communicating with a video door station.
NOTE:
You cannot record sounds.
Video recording
*You can also record sounds from a sub station or master station by this method depending on the setting.
1 | Click | when called from, monitoring or |
| communicating with a video door station. | |
* 
turns into 
during recording.
2 Click 
to stop video recording.
NOTES:
•When you click 
while recording during monitoring, recording continues until the set communication time has elapsed or until
is clicked.
•When communication starts while recording during monitoring, you can continue the recording. When the communication or monitoring ends, recording stops.
•During recording, the square part in 
is illuminated.
GETTING STARTED USING THE PC MASTER STATIONAPPENDIX
29
