Aiphone IS-SOFT operation manual Status display icons, How to select items in the list area

Status display icons

The following icons are displayed here depending on the status of the PC master station.

*The color of an icon changes according to the priority level. Normal: green

Priority: yellow

Urgent: red

List of the mainly-used icons

Icons	The status when the icon appears
	Appears while talking to the target station, being called
	from another (PC) master station, etc.
	Appears while being called.
	Appears when paging.
	Appears when the microphone volume is set to OFF, or
	the PRIVACY function is activated.
	Appears while transferring is suspended.

Appears while receiving a call from a station transferred by another one.

*This icon also appears on the station that performs transferring.

Appears while searching for a station, zone or remote site.

Appears while monitoring.

Appears during scan-monitoring.

Appears when an error message is displayed.

Appears while performing chime paging.

Shows it is a waiting time for shifting to the next performance, etc.

Displaying call and/or (chime) paging record and reception record

Call and/or (chime) paging record and reception record can be displayed on the monitor for each up to 20 items.

*When no answer was returned to an incoming call from this PC master station, it is displayed in the reception record list. In the records, unanswered incoming calls are marked with ☆ (outlined in yellow) or .

: Unanswered calls that have not been confirmed on the list yet

☆: Unanswered calls that have already been confirmed on the list

NOTES:

•The calls that are not received at the PC master station are not recorded. (A PC master station cannot receive two or more calls at a time.)

•The record of unanswered incoming calls can also be automatically displayed by the setting in the Setting window. ( → “SETTING MANUAL”)

•The reception of chime is not recorded.

•A monitoring operation is not recorded. If monitoring is shifted to talking, it will be recorded.

How to select items in the list area

1.Highlight the desired item by clicking repeatedly, or pointing to it with the cursor.

2.Double-click the highlighted item with the cursor to go on to the next selection list.

*If there is no additional selection list, perform the corresponding action (calling, monitoring, paging, etc.).

This manual mainly describes operation methods by using . You can also use the cursor if you prefer.

6