FLANGER 139

FLANGER
The common parameters for the Flanger effects are:
• Rate (0.1Hz - 10.0Hz) Adjusts the speed of LFO
• Depth (0% - 100%) Adjusts the depth of LFO
• Fdback (0% - 100%) Adjusts the feedback amount
• FB Inv (ON/OFF) Inverses the phase of feedback signals when enabled

MONO FLANGER

This is a typical flanger effect with mono-in and mono-out.
You can adjust the pan setting of the effect sound with the
additional Pan parameter:
• Pan (-60 - +60)

STEREO FLANGER

This is a stereo flanger effect (mono in - stereo out).
You can adjust the width and spread of the stereo im-
age with the additional Width parameter:
• Width (0% - 100%)

XOVER FLANGER

This is a variation of the STEREO FLANGER. The feed-
back from the L/R channels is input to the opposite
channels.
The parameters are the same.

PAN FLANGER

This effect adds an auto panning effect to the mono
flanger.
v1.6 Operator’s Manual