Q-STRIP FUNCTION KEYS/CHANNEL ENCODERS 13

Q-STRIP FUNCTION KEYS/CHANNEL ENCODERS
Below the RECORD/EDIT SELECT keys to the left of the panel are the Q-CHANNEL key
and the Q-STRIP FUNCTION keys:
Directly above the channel faders is a row of continuous rotary encoders (the Q-STRIP / Q-
CHANNEL) with a 'collar' of LEDs around each of them that serve a variety of purposes.
When the Q-CHANNEL key is off, they operate as the Q-STRIP.
On power up, their default function is to act as PAN controls with one pan control for each of
the channels of the current Fader Bank.
However, they may be used to set FX/AUX send levels.
This functionality is selected using the Q-STRIP FUNCTION keys:
PAN : Sets the rotary encoders to act as pan controls for each of the channels.
FX/AUX 1-4 : Sets the rotary encoders to act as send levels for the internal effects channels
or to the AUXILIARY bus.
NOTE:
If the sends are configured as stereo sends, FX/AUX1 sets the send level and FX2 sets the pan
position. The same is true for FX/AUX3/4 - if set to stereo, FX/AUX3 sets the level and FX/AUX4
sets panning.
v1.6 Operator’s Manual