Alamo 1900 manual Attachment to Tractor

ASSEMBLY

ATTACHMENT TO TRACTOR

•Reverse tractor squarely up to the machine.

•Connect the tractors draft links - selecting the rear most hole in the machines lower link brackets that allow the machine to be mounted without contacting the tractor.

•Ensure that the same hole is used on both sides.

•If necessary fit the spacers supplied (as required) to minimise sideways movement of the tractor draft links within the hitch brackets.

•Tighten tractor’s stabilizers.

•The lifting equipment may now be removed.

•Fit the stabilizer nose into the tractors top link position. Use the highest position available avoiding any load sensing properties.

•The bolt-on nose of the stabilizer is reversible to accommodate a variety of tractor linkage designs. (Optional stabilizer nose available).

•Stretch out the stabilizer and rest the bottom legs on the lower rail.

•Do not fit stabilizer lower pins at this stage.

1900 07/11 Assembly Section 3-5

© 2011 Alamo Group Inc.

ASSEMBLY