ASSEMBLY

ASSEMBLY

DEALER SETUP INSTRUCTIONS

1.The machine will be delivered in a partially dismantled condition, secured with transport strap and banding.

2.Choose a firm level site.

3.Remove the transport strap, banding straps and loose items.

4.Fill tank with oil from the chart or equivalent.

5.Raise the machine using overhead lifting equipment with a minimum capacity of 1500kg

SWL. LEAVE IN POSITION AT THIS STAGE.

6.Lower the legs and pin in position selecting the holes that position the machines gearbox stub shaft approx. 75 mm below the tractors P.T.O. shaft.

Note: Leg pin position used.

7.Unbolt stabilizer from machine and remove the stabilizer nose quadrant pin.

1900 07/11

Assembly Section 3-4

© 2011 Alamo Group Inc.

Page 100
Image 100
Alamo 1900 manual Dealer Setup Instructions, SWL. Leave in Position AT this Stage