OPERATION
OPERATION
TRANSPORT POSITION
•Select ROTOR OFF and wait until rotor has stopped turning
•Ensure that the “LIFT” and “ANGLE FLOAT” are switched “OFF”
•Select “SLEW” mode on the control assembly.
•Operate “SLEW IN”
•Operate “LIFT” and “REACH” to position the machine.
•Operate “REACH IN” until dipper arm contacts the transport cradle.
•Select “LIFT UP” and raise the arms until the tension link is 300mm from the tractor cab.
•Operate “ANGLE” and position the flail head in as compact position as possible. (see transport position)
•Fully screw in the lift ram and slew ram taps.
1900 07/11 | Operation Section |
© 2011 Alamo Group Inc.
