Alamo manual •Tighten check chains and/or stabilizer bars, 1900 07/11, Assembly Section

ASSEMBLY

•Raise the stand legs into the work position and secure with lock pins.

•Tighten check chains and/or stabilizer bars.

•Fit machine controls into the cab. (Optional Cables available)

•Measure P.T.O. and cut to dimension shown.

Note: for subsequent use on different tractors measure again - there must be a minimum shaft overlap of 150mm.

1900 07/11 Assembly Section 3-9

© 2011 Alamo Group Inc.

ASSEMBLY