System Requirements

System Requirements

Memory Requirements

OmniSwitch 6800 Series Release 6.1.3.R01 requires 256 MB of SDRAM and 64MB of flash memory. This is the standard configuration shipped.

OmniSwitch 6850 Series Release 6.1.3.R01 requires 256 MB of SDRAM and 64MB of flash memory. This is the standard configuration shipped.

OmniSwitch 9000 Series Release 6.1.3.R01 requires 256 MB of SDRAM and 128MB of flash memory. This is the standard configuration shipped.

Configuration files and the compressed software images—including web management software (WebView) images—are stored in the flash memory. Use the show hardware info command to deter- mine your SDRAM and flash memory.

UBoot, FPGA, Miniboot, BootROM, and Upgrade Requirements

Note. Field upgrade of existing OmniSwitch units is required prior to loading this release. See the Upgrad- ing OmniSwitch 6800, 6850, and 9000 Series Switches to 6.1.3.R01 upgrade instructions for more informa- tion.

The software versions listed in this section are the minimum required, except where otherwise noted.

OmniSwitch 6800 Series

Miniboot: 6.1.2.49.R03 or later

BootROM: 6.1.2.49.R03 or later

OmniSwitch 6850 Series

UBoot: 6.1.3.601.R01 or later

Miniboot.uboot: 6.1.3.601.R01 or later

OmniSwitch 9000 Series

UBoot NI: 6.1.1.167.R02 or later

UBoot CMM: 6.1.1.167.R02 or later

Miniboot.uboot CMM: 6.1.1.167.R02 or later

FPGA CMM: Major Revision: 2 Minor Revision: 25 (displays as 0x19)

POE Firmware

5.01

page 4

OmniSwitch 6800/6850/9000—Release 6.1.3.R01

Page 4
Image 4
Alcatel-Lucent user manual Memory Requirements, OmniSwitch 6800 Series, OmniSwitch 6850 Series, OmniSwitch 9000 Series