Open Problem Reports and Feature Exceptions
Open Problem Reports and Feature Exceptions
The problems listed here include problems known at the time of the product’s release. Any problems not discussed in this section should be brought to the attention of the Alcatel Technical Support organization as soon as possible. Please contact customer support for updates on problem reports (PRs) where no known workaround was available at the time of release.
Switch Management
Command Line Interface (CLI)
Problem Reports
PR 94134
Display of mobile ports by using the CLI “port range” command shows only the information about the first port in the range on an OS9000.
Workaround: The current CLI output for mobile ports is line based, which does not allow for a practical output of the port range. CLI command to display the mobile port should not use port range in the command.
PR 95896
On an OS9000, when user permissions are changed, they do not have an immediate effect.
Workaround: The Session Manager polls the servers (through AAA) every 5 minutes for changes in permissions. For an immediate impact, the administrator may remove the user from the switch to deprive the user from certain permissions. This way the new permissions are current when the user logs on again. By the same token, whenever an administrator decides to remove a user from the switch, he/she should close all of the sessions to which the user is logged on.
PR 104635
Applying the
Workaround: Use the hybrid command for combo ports and use the regular
"interfaces <slot/port> hybrid fiber speed 100" for combo port.
"interfaces <slot/port> speed 100" for
PR 105168
When using the CLI "show ni" command, the display of XFP and SFP Model name and Description displays the manufacturer's name. These fields should display the Model Name and device description.
Workaround: There is no known workaround at this time.
page 48 | OmniSwitch |
