Open Problem Reports and Feature Exceptions
page 58 OmniSwitch 6800/6850/9000—Release 6.1.3.R01
PR 99269
An IGMPv3 or MLDv2 membership report with an exclude filter containing 0.0.0.0 or :: in the source list
will potentially disrupt IP Multicast Switching and Routing for the particular group membership being
reported.
Workaround: Neither 0.0.0.0 or :: are valid source addresses. They should not be used in source filters.
PR 105039
When Proxying in IPMS is enabled on an OS9000, IGMPv3 and MLDv2 reports generated by the system
on behalf of clients are not aggregated; rather IGMPv3 and MLDv2 reports are generated containing a
single record.
Workaround: There is no known workaround at this time.
Link Aggregation
Problem Reports
PR 90656
The same actor admin key assigned for two different dynamic link aggregates could cause ports to join
wrong aggregates.
Workaround: Assign unique actor parameters for each configured dynamic link aggregate.
PR 100537
If the link aggregation state is changed on an OS6850, the config sync status shows incorrectly as synchro-
nised. This will result in the NI's going down on takeover.
Workaround: Issue the copy working certified flash-synchro command and then do a takeover.
Port Mirroring/Monitoring
Problem Reports
PR 86338
An OS6800/OS9000 preserves the INGRESS tag format of the packet for EGRESS mirroring, which
makes the mirror packet go out tagged though the real egress packet is not tagged.
Workaround: There is no known workaround at this time.