Open Problem Reports and Feature Exceptions

PR 104874

If CPU is at 100% on an OS6800, then the commands "copy working certified" or "copy working certified flash-synchro" can make the system timeout and the primary will crash with pmd. The timeouts are printed on the screen. So, the user can know when it timeouts. User has to be aware of the copy from working to certified process.

Workaround: Prevent doing a copy working certified or copy working certified flash-synchro if high CPU or remove CPU load.

PR 106941

Processing for CMM MIB variable chasTempRange not correct for non-primary slots on OS6800.

Workaround: There is no known workaround at this time.

PR 106975

If a WINTEK compact flash is installed on an OS6850, WINTEK is not displayed when you use the show hardware info command.

Workaround: There is no known workaround at this time.

PR 107619

NI 1 becomes non-primary in a OS6850 stack after “reload stack” if NI 1 is an OS6850 Lite.

Workaround: There is no known workaround at this time.

Power Over Ethernet

Problem Reports

PR 99583

OS6850 POE units support either 510 or 360 Watt power supplies. If unlike power supplies are mixed, or if an unsupported power supply, such as a 120-Watt power supply are used, a console message and a trap are generated.

Workaround: There is no known workaround at this time.

page 82

OmniSwitch 6800/6850/9000—Release 6.1.3.R01

Page 82
Image 82
Alcatel-Lucent 6800, 9000, 6850 user manual Power Over Ethernet