WAP™

Your mobile allows WAP™(Wireless Appli- cation Protocol) connections to access op- erator and/or provided services (e.g. news, sports, weather, travel buying, etc.).

To get a WAP™ connection please make sure:

your SIM card bears a Data sub- scription

all parameters are stored into the mobile. These parameters may have been set by your operator. If not you have to enter them man- ually.

Please contact your service provider to check these elements and get the detailed list of parameters to be entered.

Storing the connection set- tings

The current date and time must be set be- fore you enter any WAP™ connection set- ting (see ’Setting the Date and Time’ on the ’Getting started with your One Touch™ 531 booklet).

The profile list can contain up to 10 WAP™ profiles. A profile is a WAP™ connection list of parameters. Each profile allows ac- cess to a specific WAP™ gateway.

To enter and store the profile details via the Assistant

1Press . Select WAP™.

2Select WAP™ profiles .

3 Choose an empty profile ([...]) by selecting Assist .

The Assistant feature allows easy entering of the WAP™ parameters to access WAP™ servers. It displays the fields to be filled in one after another.

To enter and store the profile

4Enter each parameter and vali- date by selecting OK . There are 6 screen levels to be filled in. The requested infor- mation depends on connec- tion type.

If you want to set a WAP™ (circuit) connection, please fill in the following fields:

1/6 Profile name

2/6 Gateway IP Address 3/6 Home page (URL address): select List to get

and select one of the available home page addresses or the

http:// and https:// root addresses.

Select Circuit connection .

4/6 Phone number

5/6 Login (Identification) 6/6 Password (for access control)

If you want to set a GPRS con- nection, please fill in

the following fields:

1/6 Profile name,

2/6 Gateway IP Address, 3/6 Home page (URL address)

Select Packets .

4/6 Access point name 5/6 Login (identification) 6/6 Password (for access control)

details in standard mode

You can only register profile details via the standard mode if you have previously reg- istered profiles in the Connection manager menu (see Connection manager, page 51):

1Press . Select WAP™.

2Select WAP™ profiles .

3Choose an empty profile ([...]) by selecting OK .

4Enter the profile name and select OK .

5Select Settings .

54

Page 54
Image 54
Alcatel Carrier Internetworking Solutions One Touch 531 Storing the connection set- tings, To enter and store the profile