Alienware M17X R4 owner manual Replacing the Graphics-Card

14	Replacing the Graphics-Card
	Heat Sink Fan

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance.

Procedure

1Align the screw holes on the graphics-card heat sink fan with the screw holes on the chassis.

2Tighten the captive screws that secure the graphics-card heat sink fan to the chassis.

3Connect the graphics-card heat sink fan cable to the connector on the system board.

Postrequsites

1Replace the compartment door. See "Replacing the Compartment Door" on page 15.

2Replace the battery pack. See "Replacing the Battery Pack" on page 13.

3Follow the instructions in "After Working Inside Your Computer" on page 11.

28 Replacing the Graphics-Card Heat Sink Fan