41 | Removing the Speakers |
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance.
Prerequsites
1Remove the battery pack. See "Removing the Battery Pack" on page 12.
2Remove the compartment door. See "Removing the Compartment Door" on page 14.
3Remove the center control cover. See "Removing the Center Control Cover" on page 41.
4Remove the keyboard. See "Removing the Keyboard" on page 45.
5Remove the power button board. See "Removing the Power Button Board" on page 55.
6Remove the display assembly. See "Removing the Display Assembly" on page 57.
7Remove the status light board. See "Removing the Status Light Board" on page 61.
8Remove the palm rest assembly. See "Removing the Palm Rest Assembly" on page 64.
Procedure
1Disconnect the speakers cable from the connector on the system board.
2Note the speakers cable routing and remove the cable from the routing guides on the computer base.
3Remove the screws that secure the speakers to the computer base.
4Lift the speakers along with the cable off the computer base.
70 | Removing the Speakers |
