31 | Removing the Power Button |
Board |
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance.
Prerequsites
1Remove the battery pack. See "Removing the Battery Pack" on page 12.
2Remove the compartment door. See "Removing the Compartment Door" on page 14.
3Remove the center control cover. See "Removing the Center Control Cover" on page 41.
4Remove the keyboard. See "Removing the Keyboard" on page 45.
Procedure
1Disconnect the power button board cable from the connector on the system board.
2Remove the screws that secure the power button board to the palm rest assembly.
3Lift the power button board off the palm rest assembly.
1
2
3
1 | screws (2) | 2 power button board |
|
|
|
3 | power button board cable |
|
|
|
|
Removing the Power Button Board | 55 |
