Address Entry
NOTE:There is no need to enter a starting point. CoPilot uses GPS
positioning to determine your location automatically.
Address entry is a step-by-step process in which you enter the state or ZIP
code,city, and house number/street name in separate screens. As you type each
entry,matches in the database appear on a pick list below. Tapping an item on
the list enters it,then you tap Next to confirm and move to the next screen.
Using Your Pocket PC for Guidance
In CoPilot's Guidance Mode you will receive turn-by-turn route guidance infor-
mation as you travel. For your safety the Driver Safety Screen will hide maps
when your speed exceeds 10 m.p.h.to avoid distractions.
REMINDER: CoPilot won’t open on your Pocket PC unless map data has been
previously downloaded from the CoPilot desktop application.
For IN-VEHICLE HARDWARE SETUP: See Getting Started - Hardware,p.3.
3. The Welcome screen gives you several
choices:
Going Toto enter a destination and
receive guidance
Tutorialfor first-time users
Help topics about basics such as trip
entry,hardware setup, and route options
GPS to set up your GPS receiver
Options to change CoPilot routing,
guidance,and map options
Live Setup for live communications
1. To launch CoPilot,tap Start,choose
Programs from the drop-down menu,
then tap the CoPilot application.
4. Tap Going To.The Going To screen will list
your stops. From here you can add a stop,
start a new trip (deleting the old one),or tap
Start Driving to begin receiving guidance to
your destination(s).
5. Tap Add Stopto enter one or more
destinations in the Select Stop screen and
begin driving.
2. The first time you use CoPilot,you
will be asked to enter a nearby city.The
program may take a few minutes to acquire
a GPS signal and determine your position. If
a signal has not been obtained after several
minutes,refer to Trouble--shooting,p.91.
6. The Select Stop screen provides you with
several different ways to enter a destination.
You can:
Enter a newAddress
Program or enter your Home address
Program or enter your Work address
Select from yourFavorite list
Search for a Point of Interest (POI)
Enter an Intersection
Enter a Contact from Outlook Express
Enter a Latitude/Longitude point
Enter a previously Saved Trip
Tap the option you want to use.These options
are described on the following pages.
1. Enter a State or ZIP code.
Pick a state from the scrollable
pick list or type in a ZIP code,
then tap Next. If you type a
state abbreviation,CoPilot will
find that state in the pick list.
In the Select Stop
screen,tap the
Address button.
2. (If you entered a ZIP code,
skip to step 3.) Star t typing
a City name. When a match
appears on the list below,
tap it and then tap Next to
continue.
- 29 - - 30 -