3
Setting up the machine
Preparation of the machine
-Inspect the machine by delivery on any damage.
-The machine can be moved by a manual pallet lifter.
-Remove the packing carefully and remove the parts on top of the machine.
-Place the machine on its final position. Keep in mind that the sides of the machine have to be free of any surroundings of at least 1 meter.
-The back must be at least 30 cm from the wall because of the turning cover.
Mechanical installation
-The machine has to be level. To check this, use a spirit level.
-The machine can be levelled by adjusting the four bolts under the machine. Loosen the lock nuts, adjust the four bolts so the machine is level and fasten the lock nuts.
/ / / / / / / / / / / / / / / / / / / / / / / / / /
30 cm
16
