4
Functions
Set the iron temperature
The left display shows the previous setting of the temperature in a blinking mode when the - button is pressed.
Now the setting is changeable by pushing the - or + button. Once the setting is done, press the return button to confirm.
Set the ironing speed
The right display shows the previous setting of the speed in a blinking mode when the + button is pressed.
Now the setting is changeable by pushing the + or - button. Once the setting is done, press the return button to confirm.
Pedal
The pedal can be used to spread out the linen.
The feeding and ironing belts stop turning while this pedal is being stepped on and the display will show during 30 seconds:
WARNING
Do not use this pedal more and longer than necessary to avoid damage of the linen by overheating. The machine gives an acoustical signal after some seconds to warn.
Finger protection panel
For safety reasons, the feeding and ironing belts stop turning if the finger protection panel is pushed backwards. The buzzer is activated and on the display will appear:
Important
This panel may also be pushed back due to accumulation or multiple folding of linen, as a result of which the machine also stops and the same warning is coming on the display. Take the linen away and reset the emergency circuit and start the machine again.
26
